[Recommendation] The development history of the foaming machine Correctly understand the foaming machine

Our company is a professional company that provides foam box production lines and other products and services. Do you know the development history of foaming machines? This article will give you a specific introduction on this aspect. Let us take a look at the 'development process of foaming machine, correct understanding of foam molding machine.' Soaking, so it is also known as 'bubbling machine'. Later, with the continuous advancement of technology, the technical content of foaming machines continued to increase, new models continued to appear, and different technical systems were formed. my country began to use foaming machines as early as the 1950s, but instead of special foaming machines, mortar mixers were used. That is, the foaming agent is directly added to the mortar mixer or concrete mixer, and the foaming machine and the mortar or concrete are mixed together to generate foam. Later, around the 1970s, dedicated foaming machines, namely high-speed impeller foaming machines, began to appear. In the future, the technology has been continuously upgraded and replaced, and now it has developed into a third-generation model with high-pressure inflation as the main body, which can basically meet the needs of foam concrete. However, compared with foreign developed countries, my country's foaming machine has a low degree of automation, and there is still a certain gap in foaming performance, which needs to be further improved. From the perspective of development trends, this gap is gradually narrowing and narrowing. The main advantage of my country's foaming machine is its low price. Most of the imported models are more than 100,000 yuan/unit, and the highest is 15-200,000 yuan/unit, while most domestic models are tens of thousands of yuan/unit, and the simple and small models are even several thousand yuan/unit. They have certain advantages in price. Therefore, it is suitable for foaming according to national conditions, and the development of foaming machines is welcomed by most small and medium-sized enterprises. More people will pay attention: The working principle of the molding machine is similar to the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous flow state) into the closed state. In the mold cavity, the process of obtaining the product after curing and shaping. How to use the forming machine: 　　 1. Choose a flat table and stabilize the machine. The legs of the forming machine can be pulled apart to make the machine panel easy to observe.　　 2. Insert the plug on the hand-held sensor head into the socket on the panel and tighten it. Pay attention to the positioning gap.　 3. Insert one end of the plug of the power cord into the socket on the rear panel of the chassis, and the other end into the power supply socket. Be sure to use a single-phase three-wire power supply.　 4. Turn on the 'main power switch' on the back panel of the molding machine, press the 'power switch' button on the panel, and wait for the 'ready' green indicator light to turn on, the machine can work. The content introduced above is about 'the development history of foaming machine, and the correct understanding of foam molding machine'. After reading our introduction, everyone has a sufficient understanding of this aspect. In addition to this, we also introduced the foam box production line, manufacturers, manufacturers, etc. in another article, so stay tuned! Keywords in this article: Foaming, Development, Model, Power, Technology, Continuous
Over the years, has become very popular as more and more people are trying it out.
Veinas is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.
The major classifications of are machine manufacturer, machine manufacturer, machine manufacturer and machine manufacturer machines.