About PEF/XPE/EPE Machine

The working principle of the PEF/XPE Tube Rolling Machine:

1. The XPE/PEF/EPE sheet  will be cut according to the required tube diameter

2.The cut  XPE/PEF/EPE sheet will be coated with aluminum film or color film

3. And then bonded together through heat melting to form tubular packaging products.

PEF/XPE Tube Rolling Machine Main application:

It is widely used in the fields of water pipe, air-conditioning heat-insulation pipe, floor heating insulation pipe, and children's playground protection.

The pipe diameter can be adjusted according to the production requirement, and the xpe foam sheet extrusion line operation is simple and flexible.

EPE foam recycling and pelleting machine , is suitable for epe foaming waste material after foaming, to processing to granule, to used in epe foam reproduction, which is adopted to basiconic screw barrel, to improve the feeding speed, and heating temperature stable, operating easily, and get high efficient.

EPE recyling machine technological process of production

The waste EPE foam sheet is added into the filler mouth of the EPE recyling machine, broken, melted and plasticized by the screw cylinder, and discharged through the exhaust mouth, then extruded into strips by the epe foam cutting machine head, and the strips are cooled by water and then cut into particles by the granulator.

The structure of the equipment

The EPE recyling machine consists of an extruder, a water tank and a pelletizer.The motor is three-phase asynchronous motor, with domestic standard: rated voltage 380V, frequency 50Hz.

Preparation before installation

Requirements: the supply voltage should be 380V(415V,220V), the frequency should be 50Hz(60Hz), the transformer capacity should be determined according to the installed capacity of the production line.Plant area is determined according to production line length.

Production and operation

Before starting up, the preset temperature of the three zones are all 200 degrees Celsius. After the temperature reaches the set temperature, the epe foam machine head (the third zone) can be set as 170 degrees after starting up. The size of the mesh filter shall be determined according to the requirements of producing particles.

Export standard packing

1.Use the PE foam sheet pack every part to make sure every part can not damage

2.Easy rust parts coating anti-rust oil then laminate with strech film

3.Use wood fix every part in container to make sure them can not move

4. Plastic film suitable for shipping

5.As per customer's request