Real gold board equipment manufacturers talk about the characteristics of real gold board

1. Comparison of utility The most basic utility of real gold plates used in factories is always for cooling and heating, but the difference between real gold plates and integral disc springs is that real gold plates used in factories can be used according to the fresh air system. The outdoor and indoor gas exchange ensures the freshness and cleanliness of the gas. 2. Air outlet comfort: The factory uses real gold plates to supply air with a large area and gentleness. It will not form a heat dead angle and a temperature difference. The outdoor temperature is comfortable. The small air supply space of the integral disc spring will inevitably lead to a heat dead angle. The temperature difference is large and the heat is uneven, and the comfort level is not too high. 3. Appearance Chigo's integral disc springs inevitably damage the overall decoration style of the home, and the factory uses real gold plates to use hidden operating channels, which can be combined with life decoration perfectly and adapt to any style. 4. Power consumption The power consumption of several integrated disc springs in the factory will not be low if they are turned on at the same time, which is not much different from the factory's Chigo home central air conditioner. In addition, since the energy consumption of the real gold plate in the factory can be distinguished and adjusted, the power consumption of the real gold plate in the operation of the factory is not much different from that of the integral disc spring for the operation of the factory with real gold plate. The larger the house, the more real gold plate is used in the operation of the factory. The more cost-effective it saves power. 5. Cleaning cost The real gold plate integral disc spring can be cleaned casually, almost you need to clean the filter element often and casually. 6. Initial cost Comparing the initial cost of real gold plate and integral disc spring used by factory, real gold plate used by factory is much more expensive. 7. Use length The use length of real gold plate in factory is about 20 years, and the use length of integral disc spring is about 9 years.