Daily maintenance of foam box production equipment is indispensable

How to carry out routine maintenance of foam box production equipment? It is a question we all want to know, so let's learn about it with the editor! 1. Keep the appearance of the equipment clean and hygienic. Under normal circumstances, the siliceous polystyrene board factory requires sanitary cleaning of the equipment before and after production. The main purpose is to clean the surrounding and surface of the equipment. Keep the equipment in a good environment and its own sanitary cleanliness, so as to prevent the equipment from being affected. Environmental impact. 2. Lubricate the equipment regularly. Due to the high processing temperature in the production engineering of siliceous polystyrene board, the lubricating oil is consumed greatly. Therefore, the lubricating oil must be supplemented in time to maintain the good performance of the equipment. Under normal circumstances, the lubrication cycle of the equipment is about one week. If there is a large amount of lack of lubricating oil, it should be found and supplemented in time. 3. Clean the inside of the equipment and tighten the screws. Although the mechanical strength of the foam box is not great during the production process, the equipment’s screws will loosen due to the long-term operation of the equipment. Therefore, regular inspection and maintenance are required, and the internal sanitary cleaning of the equipment is also very important, otherwise it may cause the products to be produced. The quality is reduced, or the performance of the equipment is reduced. This cycle is generally about one month, it is not appropriate to be too frequent, but the time cannot be delayed too long. The equipment needs maintenance for a long time. The daily maintenance of foam box production equipment is indispensable. If you have better suggestions, you can share with us.