What are the necessary equipment for the EPS foam box production line?

The production of EPS foam boxes requires a complete set of production equipment. This production line is indispensable. Xinsu Machinery is a company specializing in the production of foam box equipment. Next, let's get to know the required equipment together. 1. EPS pre-expansion machine 1. The weighing part adopts a special weighing controller and load cell, which is controlled by the touch screen and PLC to accurately control the amount of raw material input, so that the deviation is small (±0.05kg). 2. The material level control adopts the imported Korean vibrating foaming induction controller, which can correctly sense the rise of the foamed particles and keep the deviation of the foaming specific gravity to a small value (the deviation of 18-25g is within ±1%). 3. The pre-heating tank is equipped with a temperature control device, which can control the temperature change of the furnace to a small amount and achieve the effect of saving heat. 4. The steam-water separation device can effectively eliminate the occurrence of condensed water and the agglomeration of foamed particles, thereby reducing the moisture content of the raw materials. 5. When the machine stops suddenly during operation (such as a power outage or a serious mechanical problem), the steam valve will automatically close immediately, and at the same time, it will automatically supply air to the heating furnace to prevent the material from agglomerating in the heating furnace. The quality of the product provides a double guarantee. 2. EPS molding machine and supporting mold 3. Steam boiler (you can also buy steam directly) 4. Steam storage tank 5. Air compressor 6. Compressed air storage tank 7. EPS silo (storage of foam after pre-expansion machine foaming Particles) 8. Other accessories, such as fans, pipes, wires, etc. For detailed introduction of products, please contact Mr. Zhao Gong, engineer of Xinsu Machinery, and Mr. Zhao will give you a detailed introduction!