[Summary] The foaming method of EPS foam building module equipment motor and benzene board machinery

Everyone already knows about foam box equipment, foam box equipment, manufacturers, manufacturers, etc. What about 'the foaming method of eps foam building module equipment motor and styrene board machinery'? It is estimated that many people are not familiar with it. Today we will get familiar with the experts! The production process of eps foam building module equipment has great energy-saving potential. Taking injection molding machine as an example, the process of injection molding machine is generally divided into several stages such as clamping, injection, melting, holding pressure, cooling, and mold opening. Different pressures and flows are required for each stage. For the oil pump motor, the injection molding process is in a changing load state. In the hydraulic system of the fixed pump, the oil pump motor provides a constant flow at a constant speed, and the excess hydraulic oil flows back through the overflow valve. This process is called high pressure section. Flow, this backflow will cause energy loss. The use of frequency converters can solve this problem. After adjusting the speed of the oil pump, the oil pump can provide appropriate oil pressure at various stages of injection molding machine production, which greatly reduces energy loss. As early as some end users who used frequency converters in eps foam building module equipment, system integrators provided them with frequency conversion energy-saving retrofit solutions for eps foam building module equipment. The effect was remarkable. eps foam building module equipment motors have become more Many eps foam building module equipment users have adopted frequency converters to transform their equipment. You may be interested in the article: Benzene board mechanical foaming machine appeared early in foreign countries, its original model is the use of high-speed rotation of the impeller to make foam, so it is also known as 'bubbling machine'. Later, with the continuous advancement of technology, the technical content of the foaming machine continued to increase, and new models continued to appear, forming a different technical system. That is, the foaming agent is directly added to the mortar mixer or concrete mixer, and the foaming machine and the mortar or concrete are mixed together to generate foam. Later, around the 1970s, dedicated foaming machines, namely high-speed impeller foaming machines, began to appear. It is impossible for the benzene board mechanical foaming machine to produce foam out of thin air. It introduces air into the foaming agent aqueous solution to uniformly disperse it to achieve the largest possible contact interface between liquid and gas, so as to make the surface active substances in the foaming agent. An electric double layer is formed on the surface of the liquid film and surrounds the air, forming individual bubbles. Therefore, the foaming machine is also equivalent to the foaming machine. It is equivalent to mixing the foaming agent aqueous solution with air to form bubbles. The main body of foamed concrete is foam, so the foaming machine for making foam has become the key equipment and main machine for the production of foamed concrete. Without the foaming method of foaming benzene board, there is no foaming concrete. Is the introduction of the above-mentioned eps foam building module equipment motor and other issues helpful to you? If it helps, please continue to pay attention to the introduction of our manufacturers, manufacturers, foam box equipment, and so on! Keywords of this article: eps foam foam equipment concrete
Zhuhai HuaSu Automation Machinery Equipment Co.,Ltd is fully committed to supplying high quality products and services.
To know more about automation equipment manufacturer, please check our website at Veinas Machinery.
By investing in an ethical supply chain, Zhuhai HuaSu Automation Machinery Equipment Co.,Ltd position ourselves to engage with a driven, engaged customer base.