[Summary] Introduction to eps foam building module equipment How to use foam forming machine

Our company is a well-known domestic company that provides foam building module equipment, manufacturers, manufacturers and other products and services. I have introduced some related content to you before, and today I will learn about the use of'eps foam building module equipment to introduce the foam forming machine. Method The production process of eps foam building module equipment has great energy-saving potential. Taking injection molding machine as an example, the process of injection molding machine is generally divided into clamping, injection, melting, holding pressure, cooling, mold opening, etc. Stages, each stage requires different pressures and flows. For the oil pump motor, the injection molding process is in a changing load state. In the hydraulic system of the fixed pump, the oil pump motor provides a constant flow rate at a constant speed, and the excess hydraulic oil flows back through the overflow valve. This process is called high pressure section. Flow, this backflow will cause energy loss. The use of frequency converters can solve this problem. After adjusting the speed of the oil pump, the oil pump can provide appropriate oil pressure at various stages of injection molding machine production, which greatly reduces energy loss. As early as some end users who used frequency converters in eps foam building module equipment, system integrators provided them with frequency conversion energy-saving transformation schemes for eps foam building module equipment. The effect of the foam was remarkable, and the introduction of eps foam building module equipment became more and more. Users of eps foam building module equipment adopted frequency converters to transform their equipment. Related article recommendation: The working principle of the molding machine is similar to that of the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous flow state) into the closed mold. In the cavity, the process of obtaining the product after curing and shaping. How to use the molding machine: 　　 1. Choose a flat table, put the machine steady, and pull the molding machine feet apart to make the machine panel easy to observe.　　 2. Insert the plug on the hand-held sensor head into the socket on the panel and tighten it. Pay attention to the positioning gap.　 3. Insert one end of the plug of the power cord into the socket on the rear panel of the chassis, and the other end into the power supply socket. Be sure to use a single-phase three-wire power supply.　 4. Turn on the 'main power switch' on the back panel of the molding machine, press the 'power switch' button on the panel, and wait for the 'ready' green indicator light to turn on, the machine can work. The above is the whole content of 'eps foam building module equipment introduction to the use of foam forming machine'. If there is anything that is not well understood, our professional customer service will answer you in detail, and we will introduce you to foam building next time. Modular equipment, stay tuned! Keywords of this article: foam eps equipment process power supply
Veinas saves time and increases productivity because it's one of the most complete sources of business and contact information.
Zhuhai HuaSu Automation Machinery Equipment Co.,Ltd’s goal is to provide the customer with an enjoyable, honest service by satisfying individual customers practical transportation needs with a quality product.
Before investing in a machine manufacturer automation equipment manufacturer, it can benefit to have an understanding of the different types of and the most effective strategies to machine manufacturer. Go to Veinas Machinery for more tips.
In order to obtain the most suitable for your machine manufacturer, you need to contact qualified suppliers which can produce super quality to your specifications and offer a friendly price.