| Veinas

Latest products

Round knife slitting machine for Honeycomb cardboard

Automatic Two-side Four-column Oil Press Machine for EPE

Automatic Two-side Four-column Oil Press Machine for Leather

Automatic Two-side Four-column Oil Press Machine for Sponge

Product Information
Feedback

Company Advantages
1. The materials or components used in Veinas are strictly selected by QC team. The selected materials or components have to be tested under professional devices or machines to check their reliability. The product has access to a wide range of custom production use
2. By using this product, the process of production is significantly streamlined. In this way, the whole production efficiency has been improved. It works well even in very bad conditions
3. This product has functional safety. Possible failures or faults which could lead to a hazard are analyzed in detail in the manufacture, hence they are eliminated or reduced in use. With auto operation function, it helps save labor cost and reduce the misoperating rate
4. The product has the advantage of strong compatibility. It can perfectly work with other mechanical systems to bring out the best results. The imported advanced components and controller ensure its stable performance
5. The product is built to last. Thanks to its durable construction, it is able to withstand great abuse under harsh environments. The product is anti-dust and easy to clean

EPE Foam Extrusion Line

In the production process of EPE foam or expanded polyethylene faom packaging materials, physical foaming is used instead of chemical foaming. Currently, the most common foaming is using butane gas foaming. The principle of foaming is to use butane gas to be liquid in the jar, and then to gasify instantaneously when extruding from the foaming head. Because the foaming of EPE resin is the result of the physical foaming agent changing from liquid to gas, The second , foaming agent is required to be colorless, odorless, non-toxic, non-corrosive, no residue is left in the polymer after foaming, low permeability in the polyethylene melt, low vapor pressure at room temperature, high volatility, molecular weight Low density and high density. The gas cost per unit volume is low. It can be dissolved in polyethylene in the extruded state. When the temperature and pressure are increased, the amount of solubility will increase. It is easy to make the plastic foam molded into a foam with low density.

1. Main Technical Parameter:

Extrusion size (mm)	90	105	120	135	150	180	200	220	250
Sheet thickness (mm)	0.5 3	0.5 5	1 6	1.5 10	3 12	3 16	3 25	3 27	3 30
Max width (mm)	1600	1600	1600	1600	2000	3000	4000	4000	4000
Production efficicy (kg/h)	45 95	65 150	95 250	120 300	200 300	250 400	350 500	500 700	500 800
Capacity(KW)	80	95	120	145	270	310	400	450	510
Power of main motor (KW)	37	45	55	75	132	160	200	250	250
Power of traction motor(KW)	1.5	1.5	1.5	1.5	2.2	2.2	2.2	2.2	2.2
Weight (T)	6.5	7	8	9	10	12	15	18	22

2. Main streamline systems:

Serial Nr.	Name	Item	Specification
1	Extrusion machine	Screw diameter (mm)	90.105.120 135.150.170.180
		Screw L/D ratio	55
		Speed-adjusting mode of drive engine	Frequency convertor
		Heater type	Far FIR or casted aluminum heater
		Heating zone and temp-controlled type	Zone 12 or zone 14automatic temp control
		Cooling method	Water cool
2	Butane pump	Type	Horizontal bar plunger metering pump
		Rated flow L/H	40.63.80.100.120.160
		Exhaust pressure(Mpa)	<20
		Motor power(Kw)	3-4
3	Monostearin	Type	Horizontal bar plunger metering pump
		Rated flow L/H	4.6.8.10.12
		Exhaust pressure(Mpa)	<20
		Motor power (Kw)	0.7、1.1、1.5
		Monostearin vol.(L)	7
4	Machine head	Specification (mm)	85-95 or Custom
		Heater type	Casted aluminum heater
		Heating zone& temp- controlled method	Zone 2 automatic temp-control
		Cooling type	Water cooling
5	Shaping&cutting	specification of shaped device (mm)	350-380or custom
		Wind loop diameter(mm)	500-700 or custom
		Ventilator power of wind loop(Kw)	0.75
		Ventilator power of shaped device(Kw)	0.55
		Cutting motor power(Kw)	0.18
		Cutter diameter(mm)	200-400
6 7	Tractor Winder	Traction roller diameter (mm)	270-320
		Traction motor power(Kw)	1.5（speed-adjusting）
		Decelerator speed ratio	15
		Rolling method	One station cyclic reeling
		Torque motor capacity (Nm)	10
		Overturn motor power (Kw)	0.55
		Counting method	Automatic counter
		Max winding diamter(mm)	1500

Company Features
1. Strong technical force and professional technicians guarantee the quality of more.
2. Being passionate is always the foundation for success. The passion and enthusiasm are the fuels that encourage us to work harder and more active in helping clients solve problems. Call now!

w******f

The material of allows to make it . The product can easily reach HDTV resolutions

j******y

The special composition of makes it obtain good performances like . It generally tends to offer brighter screens in direct sunlight

k******p

is , and especially fits for the usage in . This product can guarantee no installation gap

q******x

is designed as and it provides solution.

u******c

is more applicable to with its features such as . The product has been customized to serve iPhone, Samsung, and Motorola brands

a******u

The product can stand up strong disinfectants. Its specially coated metal materials make it effectively withstand disinfection environments. The product sells well in Europe, North America, and South America regions

Product Message

*Name

Phone

*E-mail

*Content