[Illustration] The product structure of the foam cutting machine The use process of the foam machine

How to use foam machinery? Today, Hebei Changxing Foam Machinery Co., Ltd. will bring you the 'product structure of foam cutting machine and the use process of foam machinery　The structural characteristics of the foam cutting machinery are as follows: 　　1. Equipped with a movable cutting and adjusting device. In order to ensure the size and accuracy of the cutting material, the machine is equipped with a digital display ruler.　　2. The movable worktable adopts the suction method of negative pressure, and the cut foam can be fixed and not shifted randomly.　　3. When the operation is stopped, it is equipped with manual and automatic devices.　　4. The red brake button of the foam cutting machine is used for manual braking. When the start button is pressed, this button becomes invalid. When the brake electromagnets are attracted to each other, press the start button foam again, and the brake electromagnet of the foam cutting machine's product structure is released immediately. Many people have checked: A certain amount of foaming agent and water vapor are retained in the beads after the foam machinery equipment is pre-expanded. When it is out of the machine, it condenses into a liquid, and the liquid foaming agent is dissolved in the polystyrene to make the bubbles. The pressure drops quickly, negative pressure (partial vacuum) appears in the bubble, and the beads are very soft and easily deformed. Therefore, when air is sent, try not to make the wind pressure too large. The inner wall of the duct should be as smooth as possible, and the bending radius should be as large as possible (to reduce collision resistance). The pipeline should be a good conductor of electricity, and the entire line must be grounded to avoid static electricity. Sparking, the transmission speed should not exceed 8m/s to avoid damage to the beads. A certain amount of foaming agent and water vapor are retained in the pre-expanded beads of the foam machinery and equipment. When they are discharged from the machine, they will condense into a liquid, and the liquid foaming agent will dissolve into the polystyrene to quickly reduce the pressure in the bubbles. , There is negative pressure (partial vacuum) in the bubble, and the beads are very soft and easily deformed. Therefore, when the air is sent, try not to make the use process of the air cutting machine to press the foam machine to be too large. The inner wall of the air pipe should be as smooth as possible, and the bending radius should be as large as possible (to reduce collision resistance). The pipeline should be a good conductor of electricity. The whole line is grounded to avoid static ignition, and the transmission speed should not exceed 8m/s to avoid damage to the beads. The beads of the foam mechanical pre-expander are wet. After being discharged from the pre-expander, it absorbs air and suddenly encounters cold, causing the foaming agent in the honeycomb cells to condense and form a negative pressure in the cells, so the beads are in It must be placed for a period of time after the pre-expansion. On the one hand, it is dried, and on the other hand, it is allowed to infiltrate the air to eliminate the negative pressure, so that the internal pressure and external pressure in the cells are balanced, so as to prevent the cells from collapsing and make the beads elastic. The process of drying, cooling and stabilizing the cell pressure of the EPS beads just out of the pre-expander is called maturation. Maturation improves the further expansion of the pre-expanded beads during the molding process, the fusion between beads and the elasticity of the beads, which is beneficial to improve the quality of EPS products. Read the 'Product structure of foam cutting machine foam machinery use process, Stay tuned for our follow-up news! Keywords of this article: foam cutting machine machinery foaming agent pressure brake
Zhuhai HuaSu Automation Machinery Equipment Co.,Ltd's products comply fully with all compatible producing regulations.
Interested in the that create such effect? Come to Veinas Machinery to see some items.
Deeper connections between Veinas and automation equipment manufacturerare made when you go beyond the white lights of a corporate space.